Linn Stereo Pre-Amplifier owner manual User Options, Description, Possible settings

User Options

This section explains how you can configure certain features of the KLIMAX KONTROL to suit your requirements.

Note:

The unit must be in standby mode.

To enter user options mode:

■Hold STANDBY until the front panel display shows SLEEP DISPLAY.

To cycle through the user options:

■Repeatedly press or hold SOURCE +/SOURCE - on the front panel or BAL R / BAL L on the handset.

To adjust the setting of an option:

■Repeatedly press VOLUME +/VOLUME -.

To store settings and exit user options mode:

■Press STANDBY.

The available user options are detailed in the following table:

Defaults are shown in bold.

User Option	Description	Possible settings
SLEEP DISPLAY	The display on the front panel when the unit is in	VOLUME, LOGO, SOURCE,
	sleep mode.	NOTHING
SLEEP TIME	The time between the audio signal ceasing and the	2s, 5s, 10s, 20s, NEVER
	unit entering sleep mode.
INPUT 1	Signal type for input 1.	BALANCED, UNBALANCED
STARTUP SOURCE	Source the unit is in when brought out of standby.	INPUT 1, LAST SOURCE,
		INPUTs 2-5
STARTUP VOLUME	Volume level the unit is in when brought out of	DEFAULT, LAST SOURCE
	standby.	50/(-40dB), 0/(- ∞) to
DEFAULT VOLUME	Volume level the unit selects when brought out of
	standby if STARTUP VOLUME (above) is set to DEFAULT.	100/(+10dB)

14