Linn Stereo Pre-Amplifier owner manual Technical Specification, General, Audio inputs, Gain range

Technical Specification

General	Dimensions	60mm (H) x 350mm (W) x 355mm (D)
	Weight	9kg
	Power consumption	15W
	Mains supply fuse	100V to 240V AC T800mA anti-surge
	Mains supply range	100V to 240V AC nominal
Audio inputs	Impedance (unbalanced)	10kΩ
	Signal (unbalanced)	0dBV (nominal) +15dBV (maximum)
	Impedance (balanced)	7.8kΩ
	Signal (balanced)	+6dBV (nominal) +20dBV (maximum)
	Common mode rejection ratio	70dB (1kHz @ 0dBV)
Gain range	Minimum to maximum	-95.5dB to +9.5dB in 0.5dB steps
Audio outputs	Impedance (unbalanced)	300Ω
	Signal (unbalanced)	+15dBV (maximum) 8V peak
	Impedance (balanced)	600Ω
	Signal (balanced)	+15dBV (maximum) 8V peak
	Frequency response	2.3Hz to 200kHz
	Distortion (harmonic)	0.0025% (1kHz @ 0dBV)
	Noise floor	Less than -100dBV
	Cross talk (channel to channel)	-116dBv
	Cross talk (source to source)	-116dBv
	Noise measurement	-123dBV @ 1kHz (√1Hz)
	Dynamic range	115dB

17