Installation - Detachable Terminal Block
Detachable Terminal Block Wiring:
R
www.ListenTech.com
Pin 1: | Speaker + |
Pin 2: | Speaker - |
Pin 3: | Ground for Battery or Power Source connection |
Pin 4: | +12VDC Battery or Power Source |
Pin 5: | UP remote control function |
Pin 6: | DOWN remote control function |
Pin 7: | MUTE remote control function |
Pin 8: | Common for remote control function |
Installation - Audio Connections
OUTPUT Audio
The OUTPUT audio section is composed of an OUTPUT audio selection switch, a male XLR balanced audio OUTPUT connector and two phono unbalanced audio OUTPUT connectors.
OUTPUT Audio Selection Switch
This switch selects what audio is routed to the OUTPUT audio connectors. The switch has three positions:
1.RX ONLY. In this position, only RECEIVE audio is routed to the OUTPUT.
2.RX + AUX. In this position, both the RECEIVE and AUXILIARY audio are mixed and routed to the OUTPUT.
3.RX or AUX. In this position, the OUTPUT audio is either RECEIVE or AUXIL- IARY audio. When the RECEIVE audio is squelched (indicated by the illumination of the SQUELCH LED on the front panel), AUXILIARY audio is routed to the OUTPUT. When RECEIVE audio is not squelched, RECEIVE audio only is routed to the OUTPUT.
LISTEN TECHNOLOGIES CORPORATION 8535 South 700 West, Suite A Sandy, Utah
10