The OUTPUT level is low.
R
www.ListenTech.com
i.Make sure the MIC/LINE switch is in LINE.
ii.Adjust the RECEIVE or AUX input levels.
There is no audio on the speaker.
i.Make sure the speaker selection switch is in the correct position. I can’t hear AUX audio on the OUTPUT.
i.Move the OUTPUT audio selection switch to either “RX + AUX” or “RX or AUX” depending on your application.
I cannot change channels.
i.The unit is locked on channel. Press and hold the SEEK button for five seconds. The power switch does not work.
i.This is normal when using the +12VDC power on the rear terminal block.
If you are still having problems after checking the above items, call Listen for help. We are available from 8 AM to 5 PM Mountain time, Monday through Friday, at 1.800.330.0881 or 801.233.8992, or you can
LISTEN TECHNOLOGIES CORPORATION 8535 South 700 West, Suite A Sandy, Utah
21