Operating instructions, RP 6004 Repeater, Features

Danish Interpretation Systems	User Manual

Operating instructions

The RP 6004 Repeater provides repeater and splitter functionality for the DCS 6000 system.

One CU 6010 Central Unit is needed in each DCS 6000 system, however for expansion of the system the RP 6004 Repeater is suitable.

The RP 6004 consist of the following main parts:

∙Repeater board with 4 individual repeated outputs.

The main features of the RP 6004 Repeater are:

∙4 outputs for connection to Delegate Units, Interpreter Units etc.

∙Loop through connectors for connecting additional RP 6004 or other units, which are part of the DCS 6000 system.

∙Delayed switching on of power to the four chains, to minimise the total ‘switch-on’ current on the Mains supply.

∙Designed in compact cabinet for easy installing remotely.

∙Optional 19” brackets.

Front plate layout

Front plate controls	The loop through connectors has auto-termination.
The RP 6004 Repeater does not feature any controls	q Repeated Chain 1, 2, 3 & 4
or displays, however the following indications and	q Repeated Chain 1, 2, 3 & 4
connectors are available:	RJ45 connector, 4 pieces
q Loop through connectors	DCS-LAN connectors. Used for connection to
q Loop through connectors	DM/CM6xxx, CS6032, EX6010, AO6008, JB
RJ45 connector, 2 pieces	6002/4 or IS6032 Interpreter Sets.
DCS-LAN connectors. Used for connection to one	Unused repeated chains do not need termination
of the chain connector on the CU 6010 for repeating
the DCS-LAN chain.
The second connector is for connection to other
units with DCS-LAN connector, such as more RP
6004.

Manual 01 18 04466	7