ZyAIR G-4100

Figure 12 Billing Setup

Select Time to Finish to allow subscribers a one-time login. Once a subscriber logs in, the system starts counting down the pre-defined usage even if the subscriber stops the Internet access before the time period finishes. If a subscriber logs out before the allocated time expires, the subscriber does not have to enter the user name and password to access the Internet again.

Select Accumulation to allow each subscriber multiple re-login until the time allocated is used up. If a subscriber logs out and accesses the Internet again within the time period specified in the Idle Timeout field, the subscriber does not have to enter the user name and password again to log in.

Enter the appropriate currency unit or currency symbol. Define the number of decimal places (up to 3) to be used for billing.

Enter a name (up to 12 characters) for each billing profile.

Set the duration of each billing period. When this period expires, the subscriber’s access will be stopped.

Select a time period (minutes, hours, or days) and enter the time unit in the field provided to define each “profile’s” maximum Internet access time.

Click Next to continue.

6.Use the next wizard screens to set up the ZyAIR to use either an “exclusive printer” to generate and print subscriber statements or generate them in the web configurator and print them from there. An “exclusive printer” attaches directly to the ZyAIR. It can have the ZyAIR generate subscriber statements and then print them.

15