ZyAIR G-4100

range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with your ZyAIR.

Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

2.1 Windows 2000/NT/XP

1.In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2.In the Control Panel, double-clickNetwork Connections (Network and Dial-up Connections in Windows 2000/NT).

3.Right-clickLocal Area Connection and then click Properties.

4.Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5.The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP).

-To have your computer assigned a dynamic IP address, click Obtain an IP address automatically.

If you know your DNS sever IP address(es), type them in the Preferred DNS server and/or Alternate DNS server fields.

-To configure a static IP address, click Use the following IP Address and fill in the IP address (choose one from 192.168.1.2 to 192.168.1.254), Subnet mask (255.255.255.0), and Default gateway (192.168.1.1) fields.

Then enter your DNS server IP address(es) in the Preferred DNS server and/or Alternate DNS server fields.

If you have more than two DNS servers, click

Advanced, the DNS tab and then configure them using

Add.

7