|
|
|
|
| ZyAIR |
|
| |
|
|
|
| Table 2 Front Panel LEDs | ||||
|
|
|
|
|
|
|
| |
| LED |
| STATUS |
| DESCRIPTION | |||
|
|
|
|
|
|
|
| |
| ZyAIR |
| On (Blue) | The ZyAIR is ready, but is not sending/receiving data through the wireless | ||||
|
|
|
| LAN. |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Blinking (Blue) | The ZyAIR is sending/receiving data through the wireless LAN. | ||||
|
|
|
|
|
|
|
| |
| LAN |
| On (Green) | The port is connected to a 10/100Mbps Ethernet device. | ||||
|
|
|
|
|
|
|
| |
|
|
| Blinking (Green) | The port is receiving or sending data. | ||||
|
|
|
|
|
|
|
| |
|
|
| Off | The port is not connected to a 10/100Mbps Ethernet device. | ||||
|
|
|
|
|
|
|
| |
| WAN |
| On (Green) | The WAN port has a connection to your cable or DSL modem. | ||||
|
|
|
|
|
|
|
| |
|
|
| Blinking (Green) | The WAN port is sending or receiving packets. | ||||
|
|
|
|
|
|
|
| |
|
|
| Off | The WAN link is not ready, or has failed. | ||||
|
|
|
|
|
|
|
|
|
| SYS |
| On (Green) | The ZyAIR is ready and running. |
|
| ||
|
|
|
|
|
|
|
| |
|
|
| Off | The ZyAIR is not ready or has failed. | ||||
|
|
|
|
|
|
|
|
|
| PWR |
| On (Green) | The ZyAIR is receiving power. |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| Off | The ZyAIR is not receiving power. |
|
| ||
|
|
|
|
|
|
|
|
|
| 1.4 Factory Defaults |
|
|
|
| |||
|
|
|
| Table 3 Factory Defaults | ||||
|
|
|
|
|
|
|
| |
| Username |
| “admin” (case sensitive) | WAN IP Address |
| DHCP Client (dynamic WAN IP) |
| |
|
|
|
|
|
|
|
|
|
| Password |
| “1234” |
| LAN IP Address |
| 192.168.1.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LAN DHCP |
| Server |
|
|
|
|
|
|
|
|
|
|
2 Setting Up Your Computer’s IP Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254
6