ZyAIR G-4100

 

 

Table 1 Side Panel Connections

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

PRINTER

Use the printer cable to connect an “exclusive printer” to this port.

 

 

 

 

 

 

LAN 1-4

These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a

 

 

 

straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub.

 

 

 

 

 

 

WAN

Connect your broadband modem to this port with the Ethernet cable that came with your

 

 

 

modem.

 

 

 

 

 

 

RESET

You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the

 

 

 

ZyAIR to the factory defaults (password is 1234, LAN IP address 192.168.1.1).

 

 

 

 

 

 

POWER 5VDC

After you’ve made the above connections, connect the ZyAIR’s included power adaptor to

 

 

 

the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on.

 

 

 

The LAN and WAN LEDs flash and then turn on if they have proper connections. The

 

 

 

ZyAIR LED turns on for 20 seconds and then turns off. The SYS LED turns on. The ZyAIR

 

 

 

LED turns back on and blinks if the wireless connection is active.

 

 

 

 

 

1.3 The Front Panel LEDs

Figure 2 ZyAIR Front Panel

5