Lodge Manufacturing GMD1-80N manual Propane Conversion, Contents Quantity NAT. to

All installations and services must be performed by qualified service personnel.

J. PROPANE CONVERSION

Parts are included with this furnace to convert from natural to propane gas. See table 1

This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. The qualified service agency performing this work assumes responsibility for the proper conversion of this furnace with this kit."

The installation of this conversion kit must be done only by qualified service personnel. These instructions must be read in their entirety before converting the furnace. Follow the start-up and operation section of this manual for instructions on the test fire subsequent to this conversion. The following instructions will outline the procedure for converting the existing burner from natural to propane gas.

When making a gas conversion, it is necessary to replace and/or modify several of the existing components. Table 1, shown below, describes these components and shows the correct model or size for each type of gas, propane, or natural.

Table 1: Contents of the Thermo Pride Gas Conversion Kits

CONTENTS	QUANTITY	(NAT. TO
		PROPANE)
Main Burner Orifice Diameter	3	#53 DMS
		(0.0595in)
Gas Valve Pressure Regulator
Kit	1	92-0659
(White-Rodgers Part No.)

21