Loewe R 26, R 32, R 37 Login and connect equipment

- 32

Operating additional equipment

Search for and store the station of the video recorder (if no Euro-AV

cable is available)

Switch on the test station on the VCR or insert a recorded tape and start

playback. In some video recorders the station must be switched on by activating

the modulator.

Then call the AV selection on the TV set with 0 AV. Select the menu item

"VIDEO" in the AV selection and call using OK.

To prevent "normal" TV stations being found in the search, pull out the antenna

plug from the antenna input of the VCR temporarily (the cable to the antenna

system).

If you cannot see the test station or playback from the cassette, the VCR is

transmitting on a different channel. You then have to search for the station or

set it manually.

1. Call the TV menu with the MENU button.

2. Select the "Settings" menu item with .

3. Select the line below using  and use  to select "Channels".

4. Select the line below using and select "Manual adjustment" using 

and call this menu using OK.

5. Enter channel "E30" under the "Channel" menu item ("Antenna/cable

(analogue)", select in this menu above if necessary).

6. Start search with the blue coloured key.

7. When the station has been found, change the name if needed, conﬁ rm with

OK and save with the red coloured key.

8. A list of the stored stations is displayed.

9. Select 0 (VIDEO) here and overwrite this station storage location using the

red coloured key.

10. Hide the menu again using the END button.

Plug the antenna plug back in.

If you now get interference because a TV station is transmitting on the same

channel as the VCR station, you have to change the transmitting station on the

VCR and search for the VCR station on the TV again.

Login and connect equipment

You have logged in and connected all connected equipment in the initial start-

up. If you want to connect other equipment or disconnect equipment, call the

connection wizard.

Call up the TV menu

Select "Connections"

Select the submenu line

Select "New devices/modiﬁ cations" and ...

Call with OK.

State what equipment you want to connect. State whether a piece of audio

equipment is to be connected (more details as of page 35). The connection

wizard then shows you which sockets you should connect this equipment to.

Then connect the equipment to these sockets according to the connection

diagram.

Connecting video/DVD recorders

In addition to the connection via the Euro-AV sockets, you also have to connect

the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD

recorder to the TV set. The antenna signal is then available to the video/DVD

recorder and the TV set.

Note: Use Euro-AV cables with right-angled plugs as shown.

ENTREE

ANTENNE

EURO AV2

DECODER

EURO AV1

AUDIO/

VIDEO

SORTIE

ANTENNE

AERIAL

RF OUT

SORTIE

OUT

AUDIO

AV1 ANT-TV