Loewe R 26, R 32, R 37 What to do, if ...

- 42

What to do, if ...

Problem Possible cause Remedy

The "Recording" menu point is not displayed in the

TV menu.

No video or DVD recorder logged in. Log in the video or DVD recorder in the connection

wizard and connect the device.

"Connections" cannot be called in the TV menu

(deactivated)

A time recording is in progress. Wait until the timer recording has ended or delete the

timer.

The control of the Loewe video recorder and the

timer do not work or do not work properly.

a) The Digital Link function is not activated or not

possible in the recorder.

b) Euro-AV cable is not connected.

c) Recorder is not logged in.

a) Activate Digital Link in the recorder (see operating

instructions of the video recorder).

b) Connect the Euro-AV cable.

c) Log in recorder.

General problems with connecting external

equipment via an AV input.

a) The device is not logged in to the connection

wizard or is connected differently than is shown

in the connection diagram.

b) The AV norm is set incorrectly.

c) The AV signal is set incorrectly.

a) In the connection wizard (TV menu –

Connections – New devices/modiﬁ cations),

compare the connection diagram with the actual

installation and connect as shown, if necessary.

b) Set the norm correctly.

c) Set the AV signal correctly.

If "Automatic" is set for AV norm or AV signal, this

can lead to errors for signals which do not conform

to the norm. Then the norm and the signal are to be

set according to the speciﬁ cations in the operating

instructions of the external device.

A decoder connection does not function or is faulty. a) The signal is not decoded because the wrong

decoder stations are selected in the connection

wizard.

b) The sound is missing in decoder mode because

the wrong decoder sound is assigned in the

connection wizard.

a) Follow the instructions in the connection wizard

again (TV menu – Connections – New devices/

modiﬁ cations) and select the corresponding

decoder station.

b) Follow the instructions in the connection wizard

again and select the right audio source (decoder,

TV or autom.), see instructions of the decoder.

All menus appear in the wrong language. Menu language has been set incorrectly. Set your menu language:

Press the INFO button in TV mode (index). Select the

ﬁ rst index item and call it by using OK. Then select

the language and conﬁ rm with OK.

Contents

Main Contents Remote control - TV functions Control units Spheros R 26 and R 32 DR+ Otherwise, switch over to an audio input. Control unit Spheros R 37 Connections to rear panel - Spheros R 26 + Connections to rear panel - Spheros R 32 and R 37 Welcome Transporting Installation options As a desktop unit As a rotating desktop unit for Spheros R 32/37 Welcome Note on the LCD screen Cleaning Disposal Packing and box For your safety Connection Power mains Antennas Spheros R 26 Spheros R 32/37 Handling the fabric hose Using the common interface module Switching on Automatic programming Station sorting Switching on/off Directing DVB-T antenna Select a TV channel Changing stations ... with the P+/P- buttons on the remote control ... with the numeric buttons of the remote control ... via the station list Call last viewed station (for DVB-T stations in UK) Basics about the menu operation Example of the menu operation For the info system ... For the index ... This is how to select the index item: Setting the sound ( Volume and other frequently used sound settings Sound off/on Other sound settings: TV How the coloured keys work in TV mode Show status display Calling the index Call additional functions Call timer overview Select picture format Move picture up/down TV menu DVB subtitles Removing the CI module Inserting a new CI module Calling the CI module menu Installing new DVB software Software is recognised automatically Image+ Image+ menu Operating modes PIP Picture in picture (PIP) PIP picture as freeze picture Selecting the station of the PIP picture Select the station of the TV picture (main picture) Operating modes PIP Functions in the PIP menu Setting the PIP type Switch to small PIP: Position of the PIP picture Operating modes EPG EPG - Programme guide Using the EPG Operating modes EPG Programming recording for recorders EPG menu Selecting providers and stations Data capture Operating modes Teletext Analogue Teletext Page selection with the coloured keys Other page selection options: Operating modes Teletext Programme timer recordings Teletext menu Digital teletext operation (only for UK device version 27) Operating modes Radio Radio Radio menu EPG - Programme guide Login and connect equipment Connecting video/DVD recorders Timer recording with video or DVD recorder Video playback Calling AV input via the station list Audio output "AUDIO DIGITAL OUT" Assignment of digital audio inputs and outputs Audio input "AUDIO DIGITAL IN" Connecting Loewe DVD Preceiver Auro 2216 PS and Tremo loudspeaker system Connecting other audio ampli ers or active speakers HDMI (DVI) connection VGA/XGA connection Set geometry Setting colour standard Sound from PC or Set Top Box Component video connection Setting the remote control using the suggestions from the remote control Operating other Loewe devices with the RC3 remote control Use the driver buttons in the TV and STB position for VCR, DVD or Digital Recorder Setting the remote control to operate devices from other manufacturers Setting the remote control using code entry Using the RC3 remote control to operate a VCR Using the RC3 remote control to operate a DVD recorders or DVD player Rotating the TV set for Spheros R 32/37 Setting the position of the TV set when switched off What to do, if ... Problem Possible cause Remedy What to do, if ... Problem Possible cause Remedy General data Technical data Technical data Electrical data Connections Accessories Service Addresses Loewe DVD VCR SAT /STB) Page Cable Box (STB)