Loewe Speaker System Wiring Loewe Flat TV – Auro – Individual Sound (L2650)

Connection

Wiring Loewe Flat TV – Auro – Individual Sound (L2650)

								Audio cable cinch -> SCART
								(available in specialised
Loewe Flat-TV								trade)
				AV2-SCART	CENTER	AUDIO OUT L/R
					COMPONENT IN	DIGITAL OUT		SERVICE
Digital audio TV -> Auro							Component Video
							(available in specialised
								trade)
							EURO-AV-cable
Only necessary for TV asLoewe
Auro
a center loudspeaker
	PREOUT		AUX1 IN AUX OUT AUX 2					Y
L	C	R	L	L			TO TV
				DIGITAL
								Pb
				IN
				DIGITAL
				OUT	TV	EXT		Pr
SL	LFE	SR	R	R	12V / 15mA			COMPONENT
						L-LINK		VIDEO OUT
L SL	C LFE		SR R					L-Link-cable	SR R	C FLE	L SL
			Six-pole cinch					Cubic plug cable

English

Connect the cables as shown in the graphic:

•Connect Auro to socket AV2 of the Loewe Flat TV. You must use a Euro-AV cable in which all contacts are wired.

•To get a better picture quality, use a three-wire cinch cable (available from your dealer) and connect it to Auro “COMPONENT VIDEO OUT” and “SD/HD- COMPONENT IN” of the TV set. Set the “VIDEO OUT SELECTOR” switch on the back of Auro to the “COMP.” position.

•With a six-wire cinch cable (available from your dealer), connect the cinch socket group “PRE-OUT” of Auro to the cinch socket group “Line-IN”  of the subwoofer. Connect the sockets as follows:

-Auro socket “Preout C” to subwoofer socket “Line IN Center”;

-Auro socket “Preout LFE” to subwoofer socket “Line IN Subw.”;

-Auro socket “Preout L” to subwoofer socket “Line IN Front Left”;

-Auro socket “Preout R” to subwoofer socket “Line IN Front Right”;

-Auro socket “Preout SL” to subwoofer socket “Line IN Surr. Left”;

-Auro socket “Preout SR” to subwoofer socket “Line IN Surr. Right”.

•Connect the cubic plug cable from the “System connector” socket  on the subwoofer to the cubic socket on Auro (the side of the cable with anti-kink). The cubic plugs are secured in the socket by a lug.

You have to press down the lug first before you can remove the cubic plug.

•To use the TV as a center loudspeaker connect “AUDIO IN C” on the TV set to “PRE OUT C” on the DVD Preceiver with a cinch cable (the connection of the center cable “C” between Auro and Individual Sound is omitted).

•To play the TV sound over Auro/Individual Sound, connect the digital audio output of the TV set “AUDIO DIGITAL OUT” with the “DIGITAL IN” input from Auro with a cinch cable.

•Before establishing the L-Link, Auro and the TV must be in the powerless state otherwise these devices cannot identify each other after switching on.

•Audio cable cinch -> SCART (available from your dealer) when using the component signal and “TV as center speaker”.

19 -