Loewe Speaker System Connecting the speakers to the subwoofer, Connecting the subwoofer to the mains, Secure all the cables in the clip, Standing speaker, Satellite speakers

Connection

Connecting the speakers to the subwoofer

Satellite speakers

Thread the speaker cable through the hole in the enclosed speaker cover (A). One of the two wires of the speaker cable ( C ) is marked black. Connect these black marked wires with the black terminal on the subwoofer  ( wiring according to the picture on the right) and the black terminal (B) on the speaker. Connect the unmarked wires with the red terminals. Then press the cover (A) back onto the satellite speaker.

English	B
	C
Satellite
speakers	A

Standing speaker

Place the standing loudspeaker carefully on the cushioned rest. Turn the two screw terminals (B) in counterclockwise direction until the openings of the terminals are visible. Connect the black marked wire of the speaker cable to the

Connecting the subwoofer to the mains

Plug the mains plug of the subwoofer into a 230 V AC socket.

Front	Front
left	right
	Subwoofer

Power OUT ON

black terminal on the subwoofer  (see connencting diagram in illustration on the right) and the black terminal (B) of the speaker respectively. Connect the unmarked wires with the red terminals.

B

	R
Surr.	L
	R
Front	C
	L
	Link Audio

		OFF
	Bass Intensity
	Min.		Max.
		Phase
	0		180
Line IN	Crossover Frequency
Right Subw. Left
Surr.
Front	50		250.

Right Center Left

Standing
speaker	C

Position the speakers as described on pages 16 to 17 or mount the satellite speakers on the wall with the wall holder or on the optional stand as described in the respective installation instructions.

Secure all the cables in the clip

Open the cable clip  at the bottom of the subwoofer, lay all the cables in it and close the clip again. This fixes the cables.

230V~50/60Hz

System connector

Surround	Surround
left	right

- 20