Initial Set-up

The transmitter and receiver modules should be linked via the transmission path for start-up for audio transmission to be secured against interference and to prevent other receiver modules in range reproducing their audio signal.

Linking modules with Loewe Flat TV (L2710)

➠Make sure that the units are set up correctly (page 22). Make the connections as described on page 23.

When combining the unit with a Loewe Flat TV (from chassis L2710 onwards) configuration and linking are menu-driven.

Switch the TV set off and on again using the mains switch. Set the remote control for TV operation.

Press the on/off button on the remote control to switch the

Loewe TV set and the transmitter on.

Switch the mains switch on the receiver module to position "1" (page 19).

Call up the TV menu.

34Select Connections.

6Change to the menu line below.

34Select Sound components.OK Select Sound components wizard.The selection Sound playback via ... appears.

Sound components wizard

Please specify here via which sound components you want to listen to your TV sound. If you select a "Speaker system", this must be connected to the AUDIO LINK socket on the back of the TV set (with an additional adapter if necessary). If your TV has no built-in speakers, the sections relating to "TV-speakers" may not be selected.

Sound components

Sound playback via ...

TV speakers

Speaker system

OK

HiFi/AV amplifier

 

 

Sound projector

 

END

HiFi/AV amplifier or TV speaker (switchable)

 

 

 

Sound projector or TV speakers (switchable)

 

 

OK Proceed

 

 

56Select Speaker system. Confirm OK.

34Select Configuration/modification. Confirm OK.

Sound components wizard

Please specify here whether you want to completely reconfigure a speaker system or whether you want to limit the configuration to changing the speaker connections, the speaker distances from the listening position or the individual speaker levels in relation to each other.

Sound components

Configuration/modification of speaker system

Complete

OK

Connections only

 

Distances only

END

Levels only

 

OK Select

 

56Select Complete. Confirm OK.

34Select External speakers.

Confirm OK. The option Connect surround speakers appears.

34Select yes.

Confirm OK. The option Wireless operation of surround speakers appears.

Sound components wizard

 

 

 

 

 

Please enter here whether you want to operate the

 

 

 

external surround speakers by radio or by wire. If you

50Hz

120Hz 50Hz

 

choose the wireless alternative, please connect the

 

 

 

transmitter module to the AUDIO LINK input of the

 

 

 

TV set and the two surround speakers to the receiver

100Hz

100Hz

 

module as described in the operating manual for the

 

 

 

"Wireless Module".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sound components

 

 

 

 

 

 

Wireless operation of surround speakers

 

 

 

END

 

yes

no

 

 

 

 

 

OK Proceed

 

 

 

 

 

 

 

 

 

 

 

 

34Select yes.

Confirm OK. The option Start Transmitter - Receiver assignment appears.

34Select yes.

Confirm OK. The green LED on the transmitter module flashes quickly.

Now, within the next two minutes, press the SET button on the receiver module for at least 3 seconds (page 19) until the green LED display flashes quickly. Wait until the link is completed.

You will find information on the LED displays on page 29.

English

27 -