Logic Controls user manual Hardware Connections, Connecting the KB5000 to a PS/2 computer

HARDWARE CONNECTIONS

The KB5000 can be connected to an IBM101 PC, XT, AT or clone computer, PS/2 computer, or computer terminal. The following diagram shows how the KB5000 connects to the computer and standard key- board or other keyboard peripheral (magnetic stripe reader, scanner, etc.). When the KB5000 is used in a stand alone configuration no connections are made to J5.

To computer keyboard or	To computer
other keyboard wedge devices	keyboard port

NOTE: Before making any connections it is always advisable to turn off the computer.

A.Connecting the KB5000 or KB5000M to an IBM101 PC, XT, AT, or clone computer’s keyboard port:

1.Use the supplied interface cable. Plug the 6-pin connector into J2 of the KB5000.

Plug the 5-pin connector into the computer’s keyboard port.

2.Connect the computer’s keyboard into J5 of the KB5000.

NOTE: J1 and J6 are not used in this configuration.

B.Connecting the KB5000 to a PS/2 computer:

1.Use the supplied interface cable. Plug in the 6-pin DIN connector of the interface cable into J2 of the KB5000.

3