K8SLI

Typematic Delay (Msec)

The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000

APIC Mode

By enabling this option, “MPS version control for OS” can be configured.

Options: Disabled、Enabled (default)

MPS Version Control For OS

The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment. Choose the new 1.4 version for Windows 2000 and Windows XP.

Options: 1.4 (default)、1.1

OS Select For DRAM > 64MB

Select “OS2” only if you are running the OS/2 operating system with greater than 64 MB of RAM. Options: Non-OS2 (default)、OS2

HDD S.M.A.R.T. Capability

Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to predict the possible failure of storage drives. Options: Disabled (default)、Enabled

Small LOGO (EPA) Show

This item allows you to show or hide the small LOGO EPA.

Options: Disabled (default)、Enabled

Advanced Chipset Features

DRAM Configuration

Timimng Mode

This item allows you to select if you want to let the bios detect and use informations in SPD or it’s you to configure those items below. Options: Auto (default)、Manual

Memclock index value (Mhz)

This item allows you to select the memory clock. When it set to “auto”, the system will automatically detected the memory clock. Options: 200、100、133、166

CAS# latency (Tcl)

This item determines CAS Latency. When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value specified by the system designer. Options: 2.0、2.5、3

Min RAS# active time (Tras)

This item allows you to select DRAM Active to Precharge Delay.

Options: Auto、5T、6T、7T、8T、9T、10T、11T、12T、13T、14T、15T

28