K8SLI

RAS# to CAS# delay (Trcd)

Select the DRAM delay time when being read.

Options: Auto、2T、3T、4T、5T、6T、7T

Row precharge Time (Trp)

You can set the time to precharge. Options: Auto、2T、3T、4T、5T、6T、7T

1T/2T Memory Timing

Use this item to select the memory timing that you installed.

Options: 1T、2T(default)

System BIOS Cacheable

When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached, provided that the cache controller is enabled. Options: Enabled、Disabled (default)

PnP/PCI Configurations

Reset Configuration Data

Select “Enabled” to reset the Extended System Configuration Data (ESCD) if you have installed a new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot boot. Options: Disabled (default)、Enabled

Resources Controlled By

BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since BIOS automatically assigns them. Options: Auto <ESCD> (default)、Manual

IRQ Resources

When resources are controlled manually, you can assign each system interrupt a type, depending on the type of device using the interrupt. This is only configurable when “Resources Controlled By” is set to “Manual”.

IRQ-3 assigned to: PCI device

IRQ-4 assigned to: PCI device

IRQ-5 assigned to: PCI device

IRQ-7 assigned to: PCI device

IRQ-9 assigned to: PCI device

IRQ-10 assigned to: PCI device

IRQ-11 assigned to: PCI device

IRQ-12 assigned to: PCI device

IRQ-14 assigned to: PCI device

IRQ-15 assigned to: PCI device

29