1 2 Installation (For Qualified Installers Only)

Alcove Installation Requirements

When the pellet stove is placed in a location where the ceiling height is less than 7' tall, it is considered an alcove installation. Because of the reduced height, the requirements listed below must be met.

•

Minimum height is 60"

•

Maximum depth is 48"

•

Minimum width is 43"

•

Minimum clearance of 9" on each side and 3" on back

Baffle Installation

Install the baffles included with the stove (see page 29 for details).

Door Seal Verification

The door is aligned prior to leaving the factory. However, shipping and installation may cause the door to become mis-aligned. Verify the door is correctly aligned and seals properly (see the section "Door Seal" under Yearly Maintenance).

Restrictor Adjustment

The restrictor is used to adjust airflow to the firepot. It should be adjusted to match the heat output setting and burn the pellets at the appropriate rate. This keeps the firepot as clean as possible.

For low heat output settings the restrictor will need to be closed or near closed to limit the amount of air. This prevents the stove from burning the pellet fuel faster than it is fed.

For medium heat output settings the restrictor will need to be opened to a medium position.

For high heat output settings the restrictor will need to be opened to a high position. This prevents the firepot from over-filling with pellets and becoming clogged with ash clumps.

Keeping your firepot clean is the most important step to maintaining a safe and efficient stove. Check and clean your firepot daily until you find the correct restrictor settings and appropriate firepot cleaning interval.

Not Enough Air

If clinkers (ashes that solidify into a clump) develop or the flame appears lazy and slow to blow the ash out of the firepot, pull the restrictor outward until the flame becomes active and the firepot holes remain clean. NOTE: If the restrictor is fully out, yet the firepot does not remain clean, the stove needs to be cleaned and checked for air leaks (see “Maintenance” section of this manual).

Too Much Air

If the flames are too active (small, flickering flames) or if burning pellets are expelled from the firepot, move the restrictor rod inwards until the flame slows down and no burning pellets are expelled (note: it is okay to have “glowing embers” jump out of the firepot). Another symptom of too much air is the heater “blowing the fire out” – a condition in which the pellets burn faster than they are fed (this is most common on low)

© Travis Industries

4080728

100 - 01 1 5 6

Page 11 Page 13
Page 12
Image 12
Lopi Yankee PS manual Alcove Installation Requirements, Baffle Installation, Door Seal Verification, Restrictor Adjustment
Page 11 Page 13

Yankee PS specifications

The Lopi Yankee PS is a remarkable freestanding gas stove that embodies elegance, efficiency, and exceptional performance. Designed for those who seek a perfect blend of traditional aesthetics and modern technology, the Yankee PS stands out as a centerpiece in any living space. One of its most notable features is its efficient heating capability. It can produce an impressive heat output, which is ideal for warming up larger rooms and open-concept living areas. The stove operates on natural gas or propane, providing versatility depending on local fuel availability.

The Yankee PS also comes equipped with a sophisticated electronic ignition system, ensuring a reliable start every time. This technology enhances user convenience, eliminating the need for matches or lighter fluids, making it a safer and more efficient option. Additionally, the stove includes an easy-to-use remote control that allows users to adjust the flame height and heat output with a simple touch, providing optimal comfort and ease of use.

Energy efficiency is another standout characteristic of the Lopi Yankee PS. With an impressive Annual Fuel Utilization Efficiency (AFUE) rating, this gas stove minimizes energy consumption while maximizing warmth in your home. This not only contributes to lower utility bills but also aligns with environmentally friendly practices.

The construction of the Yankee PS reflects quality and durability. Made with high-quality steel and featuring a ceramic glass front, the stove is designed to withstand the test of time while offering a stunning view of the flames. Its sleek design is complemented by a variety of finish options, allowing homeowners to choose a style that best fits their decor.

Safety is a top priority in the design of the Yankee PS. It comes with a robust safety screen and advanced safety shut-off systems, ensuring peace of mind during operation. These features prioritize user safety while maintaining the charm and warmth that a gas stove brings to a home.

In conclusion, the Lopi Yankee PS is an outstanding choice for those who desire a powerful yet elegant heating solution. Its combination of advanced technologies, energy efficiency, and aesthetic appeal makes it a valuable addition to any home. Whether for cozy evenings or gatherings with friends and family, the Yankee PS delivers warmth, style, and comfort.
Top Page Image Contents