zIf the password is correct, the main console will emit a long beep sound. (LCD display shown below).

Access Granted

Master Mode :

MASTER

A-AWAY H-HOME

Now the system will select the arm mode and set the system in either Away arm/Home Arm mode (see below):

A - AWAY : Press the AWAY button to set the “ Armed - Away “ alert. After the exit delay the Arm LED will illuminate steady and the system is armed in the AWAY mode.

00 HOME SECURITY

Armed AWAY

H - HOME : Press the HOME button to set “ Armed - Home “ alert. After the exit delay the Arm LED will blink and the system is armed in the AWAY mode.

00 HOME SECURITY

Armed HOME

Check Function

Press the CHECK button to check the programmed data without any password. It can only review, but it can not change the data in the ‘Check’ Mode. The menu structure is listed below.

Check :

0

– T

: To review (1- Exit) Exit time, (2-Alarm) Alarm time, (3- Entry) Entry

 

 

time.

123456 – P

: To review phone number sets.

7

– MSG

: To review recorded message

8

– DIAL

: To review dial mode.

Programmed devices can be checked without the activation of the alarm. When the main console receives data from the device/sensor the LCD displays zone label/status to confirm proper communication between the device/console status.

Speed Dial Function

zPress and hold the SP DIAL button and the assigned button. The Main console will automatically execute the autodial and alarm. If you want to cancel the autodial and alarm when they are activated, key-in the Master password to cancel them or use the Remote Control disarm button.

13