Before installing the sensor, consider the following points:

zMount the sensor two meters (6-1/2’) high for best coverage.

zMount the sensor with a 14 degree downward incline angle against the wall for optimum range.

To install the PIR Motion Sensor, please follow these steps:

zTake out the screws or double sided adhesive and install the mounting bracket on the wall. Press the ball joint portion into the bracket until it snaps securely. (Secure the mounting bracket on the wall, 2 meters above the floor).

zPlace the PIR sensor on the mounting bracket.

zTest the PIR sensor by walking within its range. When the sensor is triggered, the red LED light will flash once for 1 second.

Door/Window Detector

The magnetic Door/Window detector is a contact sensor, and should be applied on a door or window. When the magnetic contact is opened (broken) or the battery is low, the sensor will send out a message to the main console. A message on the triggered sensor can be seen on the Main Console’s LCD display.

19