3.1: System Option menu : Press 0 to start setting

Setting : 0 – T 1 2 3 4 5 6 – P

7 – MSG 8 – DIAL 9 - CODE

(1)0-T : For time setting (Default is 30 seconds.) minimum 1 second, maximum 255 seconds.

Press the 0 button, to go to the time setting (exit, alarm, entry) time

Setting : Time 1 - Exit

2 – Alarm

3 - Entry

Press the 1 button, to set the delay time for exiting the house. The default time is 30 Sec, You can set the time from 1 to 255 Sec. Press the Enter button to finish the setting.

Setting : Time

1 – Exit : 30 Sec

Press 2 button, setting alarm time for triggering alarm, The default time is 30 Sec, you can set the time from 1 to 255 Sec. Press Enter button to finish the setting.

Setting :

Time

2 – Alarm

: 30 Sec

 

 

Press 3 button, setting delay time for entering house, The default time is 30 Seconds. You can set the time from 1 to 255 Sec. Press Enter button to finish the setting.

Setting :

Time

3 – Entry

: 30 Sec

 

 

(2)123456-P Numeric key : To set the telephone number (you can program up to 6 telephone numbers, each one being up to 20 digits each)

Example: Press the 1

Button, the LCD panel will appear as shown below.

Enter the phone number, then press the ENTER button to program.

Press the

2

 

button to program Phone number 2………

Setting : Phone Num : 1

********************

Setting 1 , 2 or 3

Setting 4

:For neighbors, relatives, friends and family members to notify in case of emergencies.

:The first priority dial in case of Burglary. (check with the police dept. if this is acceptable)

8