LOREX Technology DXR116 manual System Contents, Getting Started

System Contents

The DXR116 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

DXR116 Digital Video Recorder	Hard Disk Drives
	(not included in all models)

	2 Keys for
Installation / User Manual	Hard Drive Cartridge	Power Adapter and Cord

NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE.

Getting Started

If the purchased DVR model did not contain a hard disk drive, please refer to Appendix #1 for HDD installation instructions.

1.Connect video sources and monitor(s) following the configuration example shown in Appendix # 2.

2.Connect the AC Power Cord to the Power Adapter and plug into an electrical outlet. A Red LED indicator light will be ON to indicate that the DVR is in Standby mode.

3.Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. Note: the system takes approximately 5 to 15 seconds to power up. During the power-up, you will see the following messages: “HDD Detecting”, followed by “Master HDD Connected”.

Once connected, the POWER LED will change to green, and red indicator lights be ON next to the Alarm and Timer buttons.

NOTE: IF YOU GET THE MESSAGE “HDD NOT FOUND”, PLEASE SEE APPENDIX #1 AS THE HDD IS LIKELY NOT INSTALLED CORRECTLY.

6