Page 3
A Guide to Port Forwarding Your Router
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries
reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved. WWW.LOREXCCTV.COM
The port forwarding process is dependant on the brand and model number of the router being
used. Port forwarding of a router is required with your system to allow user access to your
network device. Regardless of the Belkin Wired Router being used, the process of port forward-
ing is similar. You will need to enable the ports by locating the port range forwarding screen.
With most Belkin routers the port forwarding screen is located within the Virtual Servers option
tab. The set up instruction outlined below is an example of port forwarding using Belkin
Model F5D8230-4.
Step 1:
Open your web browser. Enter the router IP address in the address bar as shown below
(192.168.2.1), followed by pressing Enter.
Step 2:
In the status page, select the Virtual Servers option located down the left hand side of the
page
port forwarding – BeLKin wired router