System Menu
20
Record Schedule Menu
The Record Schedule controls the Recording
Type per hour for 24 hours (full day) for both
Individual Camera and QUAD recording types.
The Available Recording Types include:
• T : Continuous (Schedule*) Recording
(The DVR is constantly recording on all
channels, based on individual camera
settings).
• M : Motion Recording (The DVR only
records when Motion is detected).
• - : Recording is OFF
+ ----------- - - - - -TTTTTTTT-- +
| | | | | | | |
0 3 6 9 12 15 18 21
(▲▼): SELECT (◄►): SET ():EXIT
RECORD SCHEDULE
Motion Setup Menu
The Motion Setup controls the Motion
Detection sensitivity for each camera. The
sensitivity ranges from 0 (off) ~ 9 (high
sensitivity detection).
NOTE: To enable Motion Detection Recording,
Set the Record Schedule Type to ‘M’ for the
desired time block(s). (▲▼): SELECT (◄►): SET ():EXIT
MOTION SETUP
CHANNEL 1 SENSITIVITY
CHANNEL 2 SENSITIVITY
CHANNEL 3 SENSITIVITY
CHANNEL 4 SENSITIVITY
0
5
6
9
Hard Drive Setup Menu
The hard drive setup controls the installed hard
drive (if included).
• OVERWRITE ENABLED: Sets the
Hard Drive Overwrite to YES or NO. If
set to YES, the drive will overwrite
older video once full.
• MASTER HDD SIZE: Displays the size
of the installed Hard Drive (in MB). This
is a display only, and cannot be
changed in the menu.
• MASTER HDD USED: Displays the
amount of the Drive space used (in
MB). The percentage is also displayed
(%). This is a display only, and cannot
be changed in the menu.
(▲▼): SELECT (◄►): SET ():EXIT
HARD DRIVE SETUP
OVERWRITE ENABLED
MASTER HDD SIZE
MASTER HDD USED
MASTER HDD FORMAT
NO
###### MB
# MB #%
* NOTE: To configure the DVR for Scheduled Recording, set the Record Schedule to the Continuous
Recording Type for the desired times (i.e. to set the DVR to begin recording from 3pm ~ 10pm, set the
Record Schedule to T for all time blocks between 15hr~20hr as shown above).