STEP 1

For detailed setup information,

please refer to your User’s manual.

Hardware Installation

NOTE: Please turn off the computer’s power prior to installing the QLR Capture Card. If you are unfamiliar with installing PC hardware, it is recommended to have a PC technician perform the installation.

1.Using a screw driver remove the screws from the cover of your computer.

2.The picture shown is of a computer with its cover removed.

3.Insert the PCI Capture card into an available expansion slot.

5.Slide the computer cover back on and secure it with screws using a screw driver.

4.Secure the PCI Card by tightening the screw with a screw driver.

Congratulations!

You have completed Step 1 successfully. Your computer can now support up to 4 cameras.

QLR0440 SERIES QSG_EN_R3

Page

Page 2
Image 2
LOREX Technology QLR0440 quick start Step, Hardware Installation