![](/images/new-backgrounds/1261941/26194143x1.webp)
h)DEFAULT SET : Selecting [Y] resets all programmed settings back to the default factory settings (except for the time & date).
NOTE: If you perform a DEFAULT SET, the programmed data you have entered for the DDNS will be automatically deleted. You need to set the data again.
7.7SYSTEM SET (II)
This
a)HDD INFO DISP : Sets the display settings for information on the HDD status. This can be displayed as a percentage of HDD space used, or amount of Bytes available, or the HDD information display can be set to OFF.
b)RS232 BAUD RATE : Sets the speed at which the RS 232 input and the computer
communicate. Baud Rate, which is the rate of data transmission, can be set to: OFF, 2400, 4800, 9600, or 19200.
c)PASSWORD SET : If you select [Y], you will need to input a password when you enter the Main Menu, and [N] will allow you into the menu without a password. Changes your password for accessing the Menu. The password must be 4 digits.
d)NETWORK (TCP/IP) : There are 3 selections to choose
Dynamic IP: enabling this option will result in the unit automatically obtaining an IP address from the Router
Static IP: Enabling this option will allow the user to set their IP address
OFF: if this option is enabled, networking will be disabled.
e)USER ID/PASSWORD : User can set password for Master ID and account. Default value - ADMIN
f)GUEST PASSWORD : User can set password for GUEST account. Default value –
GUEST
NOTE: Master gets full accessibility in network whereas GUEST can view only
g)BAND WIDTH
h)IP ADDR : Set IP address for enabling network. Default value - 192 168 001 100
NOTE: automatically set when Dynamic IP is enabled
i)SUB NET : User can set Subnet Mask value for enabling network. Default value - 255 255 255 0
NOTE: automatically set when Dynamic IP is enabled
j)GATEWAY : Setting up Gateway value for enabling network. Default value - 192 168 001 001
NOTE: automatically set when Dynamic IP is enabled
k)PORT : Setting up Port value for enabling network. Default value - 5000
7.8HDD / REC SET
This submenu allows you to set the Record parameters for your Hard Disk Drive.
17