Important Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR MOISTURE

Read Instructions – All the safety and operating instructions should be read before operating this equipment. These instructions should be retained for future reference

Heed Warnings – All warnings on the equipment and in the operating instructions should be adhered to. All instructions regarding care and operation of this equipment should be followed.

Power Sources – Equipment should only be connected to the power supply specified in the operating instructions or as marked on the equipment.

Grounding or Polarization – Take precautions that the equipment is properly grounded. Take note that the power supply is fitted in the correct input jack ( marked DC 12V ), and auxiliary units ( external siren and strobe light ) are fitted into the correct external jack points.

Power-Cord Protection – Keep cable cords and plugs clear of other objects, particularly at the point where they exit the equipment.

Cleaning – Clean the equipment by wiping with a soft cloth, ( do not use any abrasive agents or water ).

Non-use Periods – Power cords should be unplugged from the outlet when left unused for a long period of time.

Object and Liquid Entry – Take care not to drop objects or liquids on any part of the equipment.

Damage Requiring Service – The alarm should be serviced by a qualified service personnel when:

-The power-supply cord or the plug has been damaged, or

-Objects have fallen, or liquid has been spilled onto the equipment, or

-The equipment has been exposed to rain, or

-The equipment does not appear to operate normally or exhibits a marked change in performance, or

-The equipment has been dropped, and/or the enclosure has been damaged.

Servicing – Do not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to a Qualified Distributor’s Service Personnel.

System Maintenance – Under normal use your system requires virtually no maintenance other than regular testing. It is recommended that you test your system once a week, and replace the batteries at least once every 6 months (or as needed).

IMPORTANT NOTE: IF YOU RETURN TO YOUR PREMISES AND FIND THAT THE ALARM IS IN PROGRESS, DO NOT ENTER, AS A FIRE OR AN INTRUDER MAY BE PRESENT. GO TO A NEIGHBOR AND CONTACT THE RELEVANT LOCAL AUTHORITIES FROM THERE.

2

Page 3
Image 3
LOREX Technology WA-410 instruction manual Important Safety Instructions