Louisville Tin and Stove HEDV403, HEDV404 warranty Contents, Specifications And Dimensions

CONTENTS

Introduction……………………………..	2	Wiring Diagram…………………………	12
Specifications and Dimensions………….	2	Removing Main Burner…………………	11
Safety Rules……………………………..	3	Proper Burner Flame……………………	11
Clearances……………………………….	4/5	Sequence of Operation………………….	13
Location…………………………………	6	Optional Kits……………………………	14
Installation………………………………	7	Trouble Shooting……………………….	17
Lighting Instructions……………………	10	Parts Drawing…………………………..	19
Pilot Adjustment………………………..	11	Parts List………………………………..	20
Burner Orifice…………………………..	11	Warranty………………………………..	22

INTRODUCTION

THIS IS A GAS-FIRED DRAFT INDUCED, POWER DEPENDENT DIRECT VENT WALL FURNACE THAT WILL OPERATE SAFELY AND PROVIDE AN EFFICIENT SOURCE OF HEAT WHEN INSTALLED, OPERATED AND MAINTAINED AS RECOMMENDED IN THESE INSTALLATION AND OPERATING INSTRUCTIONS. READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING, SERVICING, OR USING THE APPLIANCE. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS CONSULT LOCAL AUTHORITIES, OTHER QUALIFIED INSTALLERS, SERVICE AGENCIES, THE GAS SUPPLIER OR THE MANUFACTURER.

SPECIFICATIONS AND DIMENSIONS

Your Direct Vent Wall Furnace is shipped complete in one carton. This carton contains the furnace, vent cap, vent exhaust tube, air inlet tube, template with rough-in dimensions, installation and operating instructions, and the thermostat.

MODEL	INPUT				GAS	T Y P E	MAX. WALL	MIN. WALL
NO.	BTU/HR.	WIDTH	DEPTH	HEIGHT	CONN.	GAS	Thickness	Thickness
HEDV403	40,000	34-1/2”	9”	30”	1/2”	Nat.	32”	5”
HEDV404	40,000	34-1/2”	9”	30”	1/2”	L.P.	32”	5”

Page 2