Advanced Mode
Enables advanced features and settings.
The following features are enabled when Advanced mode is turned on:
•Navigation (Enables arrival radius, off- course distance and Bearings setting)
•Alarms (Enables arrival, off course and anchor alarm options)
•NMEA 0183 configuration options
•Units (Enables distance, speed, depth, temperature and bearings configuration options)
Standby mode
Lowers power consumption by turning off sonar and the display.
1.Press the PWR/Light key to access the Back- light dialog.
2.Select Standby and press Enter.
3.Press any key to resume normal operation.
NOTE: Leaving your unit in Standby mode when your boat is not in use will run down your battery.
Restore defaults
Sets unit options and settings to default values.
11 | Basic Operation |