Overlay Data
Used to select data shown on the Sonar, DownScan and Chart pages.
Overlay data
Show
Enables/disables the display of overlay data, allowing you to remove overlay data from the screen without deleting the current overlay data configuration.
Configure
Allows you to select/customize overlay data.
To add overlay data:
1.From the Sonar, Chart or DownScan page, press Menu.
2.Select Overlay data and press Enter.
3.Select Configure and press enter.
4.Press Menu and select Add. Press Enter.
5.Select a data category and press Enter.
6.Select the desired data and press Enter.
7.Repeat Steps 5 and 6 to add more data.
8.Press Menu and select Return to
Overlays. Press Enter.
9.Press Menu, select Done Configuring and press Enter.
15 | Pages |