Amplitude Scope
Displays the amplitude of the most recent echo.
Fish ID
Amplitude 
scope 
DownScan options menu
Displays fish echoes as fish symbols instead of fish arches.
Fish ID is not the most accurate method of fish detection since structure and suspended debris may be shown as a fish symbol on the display.
DownScan options
You can make adjustments to DownScan overlay settings from the sonar page. DownScan options are covered in more detail in the “DownScan Operation” section.
NOTE: The DownScan options menu will only be available when DownScan overlay is enabled.
Stop Sonar
Pauses the unit’s sonar, allowing you to get a closer look at suspended targets. Stop Sonar also can be used to prevent/stop interference between two sonar units running on the boat at the same time.
NOTE: Sonar history will not be recorded when sonar is stopped.
27 | Sonar Operation |