14
Boat Setup Reset
If you want to access the Setup screen (Boat Setup) after an engine-
tank configuration has been chosen you will have to reset the
configuration to default settings.
To reset engine-tank configuration:
1. Press MENU, highlight SYSTEM SETUP and press ENTER.
2. Choose ENG/TANK CFG and press ENTER twice. The following message
will appear: Press ENTER to reset Eng/Tnk Cfg.
3. Press MENU. The Setup Menu will appear with Boat Setup
highlighted.
EP-80R Temp Configuration The EP-80R Temperature sensor has three configuration options:
Inside, Outisde and Water. An unconfigured temperature sensor will
appear on the bus devices list as UnCfg Temp.
To configure a temp sensor:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press ENTER.
2. Highlight BUS DEVICES and press ENTER. The Bus Devices list will
appear.
3. Select an unconfigured temp sensor (UNCFG TEMP) and press ENTER.
The following message will appear: Press Enter to Configure Temp
Sensor.
4. Press ENTER, which will open the Select Temp menu with three
options: Water Temp, Outside Temp and Inside Temp.
5. Highlight the desired option and press ENTER. The temp is now
configured. You will be directed to the Bus Devices list. Press EXIT
repeatedly to return to the main display.
NOTE:
If your temp sensor is not updated on the Bus Devices list, refresh
the list by closing it and then access it again.
To unconfigure a temp sensor:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press ENTER.
2. Highlight BUS DEVICES and press ENTER. The Bus Devices list will
appear, showing all devices detected on the network.