Lowrance electronic EP-80R LMF-200: EP-80R Temp Configuration

LMF-200: EP-80R Temp Configuration

This section covers how to use EP-80R Temperature Sensor with the

LMF-200 Multi-function gauge.

NOTE:

You will notice the LMF-200 does not have an Exit key. Menus will

time out after a preset amount of time (3, 5, 10 or 15 seconds). The

default setting is 5 seconds. Refer to your LMF-200 instruction

manual for more information on the Timeout feature.

LMF-200 Multi-function Digital Gauge.

If this is the first time you have turned on your LMF-200, you will have

to complete Boat Setup before you will be able to configure your temp

sensor. If you have already completed Boat Setup skip ahead to the

segment covering EP-80R Temp Configuration.

To execute Boat Setup:

1. With Boat Setup highlighted on the screen, press MENU. The Boat

Setup menu will appear, allowing you to select an engine-tank

configuration to match the number of engines and fuel tanks on your

vessel. Boat Setup options include: 1 En/1 Tk, 1 En/2 Tk, 2 En/1 Tk, 2

En/2 Tk, 3 En/1 Tk and 3 En/3 Tk.

2. Use the UP and DOWN keys to select the correct configuration and

press MENU.

3. If you selected a configuration with more than one tank you will have

to select the tank you want to set up and press MENU, which will open