Sonar

Fish ID

 

Displays fish echoes as fish symbols instead of

 

fish arches with or without depth. This makes

 

it easier to recognize fish on the sonar display.

 

Symbols — places a fish symbol where a

 

fish is detected.

 

Depths — places depths above each fish

 

detected; helps gauge the distance from each

Fish Symbols and Depths

fish symbol to the boat.

Both — turns on both Symbols and Depths.

To select a Fish ID option:

1.Highlight Fish ID and press Enter.

2.Select Symbols, Depths or Both and press ENTER.

Fish ID Beeps — sounds a tone when the system detects a fish.

Measure Distance

Used to measure the distance from one location to another on the sonar display.

To Measure distance:

1.Move the cursor to the starting location.

2.Select Measure distance on the Sonar menu and press Enter.

3.Move the cursor to the second location. The Measure distance line will appear with the distance between the two locations shown in the cursor dialog box.

4.To measure another position, press Enter and move the cursor to the desired location.

Log Sonar Data

Used to save sonar chart data to your unit’s internal memory or to an MMC/SD card.

To access the Sounder Logging menu, select

Log Sonar Data from the Sonar menu and press

ENTER.

35

Page 37
Image 37
Lowrance electronic HDS-10M, HDS-8M Measure Distance, Log Sonar Data, To select a Fish ID option, To Measure distance