Lowrance electronic HDS-8M, HDS-10M Navionics Settings menu, Navionics Settings and Options

Chart

Navionics Settings menu

Use to customize the way Navionics data will be displayed on the Chart page, allow- ing you to adjust the features best suited for your fishing conditions.

To change Navionics Settings:

1.Select Chart options from the Chart menu and press Enter.

2.Highlight Settings and press Enter.

3.Select a setting and press enter.

4.Highlight the desired option and press enter.

Navionics Settings

Navionics Settings and Options

•Safety Depth — Allows you to display the depth areas corresponding to the safety contour desired. Available options are:

Off: No depth area displayed.

Other numeric depth values: The areas with depths up to value selected are displayed in shades going from darker blue (for lower depths) to light- er blue (for higher depths). The areas whose depths are over the selected value, and therefore navigable under safety conditions, will be displayed in white. The dryline areas are displayed in green.

•Contours Depth — Used to select the display of depth contours. Available options:

-5m: display depth contours up to 5 meters (16 feet)

-10m: display depth contours up to 10 meters (33 feet)

-20m: display depth contours up to 20 meters (66 feet)

-All: all depth contours are displayed

NOTE: When Night mode is selected, depth areas are displayed from lighter blue (for lower depths) to darker blue (for higher depths). Depth areas over the value set are displayed in black.

58