2.Slide the transducer between the two ratchets. Temporally slide the bolt though the transducer assembly and hold it against the transom. Looking at the transducer from the side, check to see if it will adjust so that its face is parallel to the ground. If it does, then the “A” position is correct for your hull. If the transducer’s face isn’t parallel with the ground, remove the transducer and ratchets from the bracket. Place the ratch- ets into the holes in the bracket with the letter “B” aligned with the dot stamped in the bracket. Reassemble the transducer and bracket and place them against the transom. Again, check to see if you can move the transducer so it’s parallel with the ground. If you can, then go to step 3. If it doesn’t, repeat step 2, but use a different letter until you can place the transducer on the transom correctly.

RATCHETS

3.Once you determine the correct position for the ratchets, assemble the transducer as shown at left. Don't tighten the lock nut at this time.

METAL

NUT WASHER

RUBBER

METAL

WASHERS

WASHER

 

 

BOLT

4

Page 6
Image 6
Lowrance electronic X-48, X-38 manual Ratchets

X-38, X-48 specifications

Lowrance has long been a trusted name in the world of fish finders and marine electronics, and the X-48 and X-38 models stand as prime examples of the brand's commitment to quality and innovation. These fish finders offer a range of features and technologies designed to enhance your fishing experience and improve your catch rate.

The Lowrance X-48 is equipped with a powerful 4000 watts peak-to-peak power output and 2400 watts RMS, providing exceptional depth capability and target separation. This model utilizes advanced sonar technology to deliver crisp and clear images of underwater structures, fish, and the bottom contour. The X-48 features a 5-inch monochrome display that provides high-resolution visuals, allowing anglers to identify fish and structures with ease.

One of the standout features of the X-48 is its ability to display detailed mapping data, which is essential for navigating unfamiliar waters. The built-in GPS and chart plotting capability allow users to create waypoints, track their movements, and return to productive fishing spots. This combination of sonar and navigation capabilities is invaluable for anglers who want to maximize their time on the water.

Similarly, the Lowrance X-38 offers an array of impressive features aimed at both novice and experienced fishermen. This model boasts a 3.5-inch monochrome display, which, despite its smaller size, provides users with excellent clarity and visibility. The X-38 employs a 2400 watts peak-to-peak power output, ensuring that even in deep water, fish can be detected with precision.

Both models utilize Lowrance's patented fish identification technology, which helps anglers quickly distinguish between species and understand fish behavior. This feature enhances the fishing experience, allowing users to make informed decisions about bait and tactics. Additionally, the X-38 and X-48 incorporate a user-friendly interface that facilitates easy operation, even for those who are new to fish finders.

Durability is another hallmark of Lowrance products. Both the X-48 and X-38 are designed to withstand harsh marine environments, ensuring that they function reliably season after season.

In conclusion, the Lowrance X-48 and X-38 models exemplify the cutting-edge technology and user-friendly design that the brand is known for. With their advanced sonar capabilities, detailed mapping features, and durable construction, these fish finders are essential tools for any angler looking to enhance their fishing adventures. Whether you are navigating familiar lakes or exploring new waters, the X-48 and X-38 provide the reliable performance needed to succeed.