For example, if you have to extend the power cable to the battery or power buss, attach one end of the fuse holder directly to the battery or power buss. This will protect both the unit and the power cable in the event of a short. It uses a
To power a NMEA 2000 buss, also connect NMEA 2000 Power cable to the boat's battery.
| External speaker wire | ||
To unit | (not used by this unit) | ||
| Black wire | ||
|
|
|
|
|
|
|
|
Optional power off |
|
switch for salt- | 12 volt |
water installations | battery |
Red wire with
3 amp fuse
NMEA 0183 NMEA 2000 Power Cable
Data Cable
Power connections for the units in this series.
NOTE:
If you're powering a NMEA 2000 buss, you will attach both the NMEA 2000 Power cable and the unit's Power Supply cable to the boat's battery. To attach the NMEA 2000 Power cable, connect the red wire to battery's + and black and shield wires to battery's
WARNING:
This product must be independently fused with the en- closed
If a malfunction happens inside the unit, extensive dam- age can occur if the enclosed fuse is not used. As with all electrical devices, this unit could be damaged to a point that it is unrepairable and could even cause harm to the user when not properly fused.
CAUTION:
Do not use this product without a
24
