Manuals / Lowrance electronic / Marine Equipment / SONAR

Lowrance electronic X105C DF, X100C manual Bracket Installation, Front

Models: X100C X105C DF

1 88

Download 88 pages 57.31 Kb

Page 31

Optional R-A-M mounting system.

Bracket Installation

Mount the unit in any convenient location, provided there is clearance behind the unit when it's tilted for the best viewing angle. You should also make sure there is enough room behind the unit to attach the power, transducer and data cables. (A drawing on the next page shows the di- mensions of a gimbal-mounted unit.)

Holes in the bracket's base allow wood screw or through-bolt mounting. You may need to place a piece of plywood on the back side of thin fiber- glass panels to reinforce the panel and secure the mounting hardware.

Front

Install the gimbal bracket. Orient the bracket so the arms slope toward

the front of your unit.

27

Image 31

Lowrance electronic X105C DF, X100C manual Bracket Installation, Front

Contents

X100C X105C DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Page Read Me First Page How Sonar Works Keyboard How to use this manual typographical conventionsMenu Commands Arrow KeysPreparations Transducer InstallationShoot-through hull installations Single-frequency transom installationsDual-frequency transom installations Single-frequency trolling motor installationsDeadrise less than Strakes Pad How low should you go?Good location Poor location Location Poor angle Transom Transducer centerline Hull bottom Shoot-thru-hull vs. Transom MountingDot Assembling the bracketTransducerTransducer bracket Ratchet Aligning the transducer on the transomRatchets Drilling mounting holes Assembling the transducerTransom Attaching transducer to transomBottom Hull Flat-bottom hull Deep-vee hull TMB-S bracket Internal tooth washer Bolt Nut Flat washer Trolling Motor Bracket Installation single-frequency onlyPartial fish arches Hulls With Floatation MaterialsTransducer aimed Transducer location High speed Trolling speed Testing Determines Best LocationTrue bottom Second bottom Manual range setting Spread epoxy here Sand this surface Shoot-thru-hull InstallationOptional Speed Sensor Installation Optional Temperature SensorTransom Bottom of hull Good locationPowering a Nmea 2000 Buss Nmea 2000 Power cable Power ConnectionsPowering Your Unit Power Supply cable red and black wires Power connections for the units in this series To Nmea To sonar Network port Units Network Socket Connecting to a Nmea 2000 NetworkNmea 2000 Cable Connections Nmea 0183 Cable ConnectionsMounting the Unit Bracket, In-Dash or Portable Front Bracket Installation173.9 77.1 27.6 137.9 Millimeter 56.9 Inch In-Dash Installation Other AccessoriesPortable Installation Face Cover Keyboard Basic Sonar OperationMain Menu Power/lights on and offMain Menu Pages Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations To adjust sensitivity To Restore Factory Settings Fish Symbols vs. Full Sonar ChartOther Free Training Aids Page To change the ASP level ASP Advanced Signal ProcessingDepth Alarms AlarmsZone Alarm Fish Alarm Calibrate Speed Chart SpeedColorLine Thin or no ColorLine Wider ColorLine Depth CursorCursor line Depth box Depth Range AutomaticTo turn Auto Depth Range on again To switch to Manual Depth RangeDepth Range Manual Depth Range Upper and Lower LimitsFish arches Area zoomed To change the upper and lower limitsFasTrack Fish I.D. Fish Symbols & DepthsTo turn off upper and lower limits FishTrack To turn the Fish I.D. feature onTo turn on FishTrack Frequency Change Transducer Frequency X105C DF only Symbols with FishTrack depthsNoise Rejection To change the frequency setting to 50 kHzTo change the frequency setting to 200 kHz HyperScrollTo turn off displayed data To change displayed data font size Ping Speed & HyperScrollTo change Ping Speed Reset Water Distance Reset OptionsTo turn off HyperScroll Set Keel Offset Automatic Sensitivity Sensitivity & Auto SensitivityTo adjust sensitivity in manual mode To adjust sensitivity in auto modeTo turn Auto Sensitivity back on Full Sonar Chart Sonar Color ModeSonar Page & Sonar Chart Display Options To change the chart mode color schemeDigital Data/Chart Split Zoom Sonar ChartCustomizing the Digital Data/Chart Screen FlashGraf Flasher Sonar SimulatorTo adjust the Surface Clarity level Stop ChartSurface Clarity Zoom & Zoom Bar Upper and Lower LimitsZoom Pan Page Unit freezes, locks up, or operates erratically Unit wont turn onNoise No fish arches when the Fish I.D. feature is offPage Page Supplemental Material Index Page Page Page Lowrance Electronics Full ONE-YEAR Warranty Not toll-free How to Obtain Service…Accessory Ordering Information for all countries Visit our web site