Lowrance electronic X105C DF, X100C specs

Notes

79

Image 83

Lowrance electronic X105C DF, X100C manual

Contents

X100C X105C DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Page Read Me First Page How Sonar Works Keyboard How to use this manual typographical conventionsMenu Commands Arrow Keys Preparations Transducer Installation Shoot-through hull installations Single-frequency transom installationsDual-frequency transom installations Single-frequency trolling motor installations Good location Poor location Location Poor angle How low should you go?Deadrise less than Strakes Pad Transom Transducer centerline Hull bottom Shoot-thru-hull vs. Transom Mounting Dot Assembling the bracket TransducerTransducer bracket Ratchet Aligning the transducer on the transom Ratchets Drilling mounting holes Assembling the transducer Transom Attaching transducer to transom Bottom Hull Flat-bottom hull Deep-vee hull TMB-S bracket Internal tooth washer Bolt Nut Flat washer Trolling Motor Bracket Installation single-frequency only Transducer aimed Hulls With Floatation MaterialsPartial fish arches Transducer location High speed Trolling speed Testing Determines Best Location True bottom Second bottom Manual range setting Spread epoxy here Sand this surface Shoot-thru-hull Installation Optional Speed Sensor Installation Optional Temperature Sensor Transom Bottom of hull Good location Powering a Nmea 2000 Buss Nmea 2000 Power cable Power Connections Powering Your Unit Power Supply cable red and black wires Power connections for the units in this series To Nmea To sonar Network port Units Network Socket Connecting to a Nmea 2000 NetworkNmea 2000 Cable Connections Nmea 0183 Cable Connections Mounting the Unit Bracket, In-Dash or Portable Front Bracket Installation 173.9 77.1 27.6 137.9 Millimeter 56.9 Inch Portable Installation Other AccessoriesIn-Dash Installation Face Cover Keyboard Basic Sonar Operation Main Menu Power/lights on and off Main Menu Pages Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations To adjust sensitivity To Restore Factory Settings Fish Symbols vs. Full Sonar Chart Other Free Training Aids Page To change the ASP level ASP Advanced Signal Processing Depth Alarms Alarms Zone Alarm Fish Alarm Calibrate Speed Chart Speed ColorLine Thin or no ColorLine Wider ColorLine Depth Cursor Cursor line Depth box Depth Range Automatic To turn Auto Depth Range on again To switch to Manual Depth RangeDepth Range Manual Depth Range Upper and Lower Limits Fish arches Area zoomed To change the upper and lower limits To turn off upper and lower limits Fish I.D. Fish Symbols & DepthsFasTrack To turn on FishTrack To turn the Fish I.D. feature onFishTrack Frequency Change Transducer Frequency X105C DF only Symbols with FishTrack depths Noise Rejection To change the frequency setting to 50 kHzTo change the frequency setting to 200 kHz HyperScroll To turn off displayed data To change displayed data font size Ping Speed & HyperScroll To change Ping Speed To turn off HyperScroll Reset OptionsReset Water Distance Set Keel Offset Automatic Sensitivity Sensitivity & Auto Sensitivity To turn Auto Sensitivity back on To adjust sensitivity in auto modeTo adjust sensitivity in manual mode Full Sonar Chart Sonar Color ModeSonar Page & Sonar Chart Display Options To change the chart mode color scheme Digital Data/Chart Split Zoom Sonar Chart Customizing the Digital Data/Chart Screen FlashGraf Flasher Sonar Simulator Surface Clarity Stop ChartTo adjust the Surface Clarity level Zoom & Zoom Bar Upper and Lower Limits Zoom Pan Page Unit freezes, locks up, or operates erratically Unit wont turn on Noise No fish arches when the Fish I.D. feature is offPage Page Supplemental Material Index Page Page Page Lowrance Electronics Full ONE-YEAR Warranty Not toll-free How to Obtain Service… Accessory Ordering Information for all countries Visit our web site