51
Overlay DataTo change the digital data shown on top of the sonar page:
1. Press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|ENT.
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
data list to highlight "Water Speed."
When selected, a check mark appears beside the data type. (If you wish,
you may now use ↓ or ↑ to select other Data Types for display.)
Data list showing "Water Speed" selected to display on Sonar Page.
3. To return to the previous page, press EXIT|EXIT.
To turn off displayed data:
1. Press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type, then press ENT until the check mark
to the left of the selected data type disappears. (If you wish, you may