1-10 Using the LSI20860
Step 2. Plug the 50-pin connector on the other end of the SCSI cable
into the SCSI connector on the peripheral device. This
connection is shown in Figure 1.4.
Step 3. Toconnect more than one device to the LSI20860, use shielded
cables to chain them together as illustrated in Figure 1.4.
Figure 1.4 Multiple External Devices Chained Together
1.3.3 SCSI Bus Termination
All SCSI devices have a set of resistors called terminators to assure
reliable operation of the SCSI bus.The devices making up the SCSI bus