2.5 Completing the Installation

Before replacing the cover on your computer, review this installation procedure check list. This can save you effort later.

Verify Installation Procedures

Done

Host adapter connection in PCI bus slot secure

Internal SCSI bus connections secure (pin-1 continuity)

External SCSI bus connections secure

Proper SCSI bus termination established

Unique SCSI IDs set and recorded for each device

Step 1. Replace the cabinet cover on your computer.

Step 2. Plug in all power cords.

Step 3. Switch power on to all devices and to your computer.

Step 4. Wait for your computer to boot up.

Step 5. To change the configuration of the host adapter, refer to the PCI Storage Device Management System SDMS 4.0 User’s Guide, for information on the BIOS software and its operation.

Step 6. Load the software and drivers suitable to your application and system.

Refer to the PCI Storage Device Management System SDMS 4.0 User’s Guide or to the guide for the software you plan to use.

Completing the Installation

2-25