The LED interface allows an LED harness to be connected to the board. J6 is the connector for both channels. Table 3.8 lists the signals and pin numbers for Connector J6.
Table 3.8 Connector J6 SignalsSignal Name | Pin |
|
|
A_LED+ | 1 |
|
|
A_LED− | 2 |
|
|
B_LED− | 3 |
|
|
B_LED+ | 4 |
|
|
3.3 Subsystem and Subsystem Vendor ID
The Subsystem ID and System Vendor ID for the LSI21003 are provided in Table 3.9. The EEPROM of the LSI21003 contains the ID numbers. During system initialization, the ID numbers are loaded into the Subsystem Vendor ID and Subsystem ID registers of the imbedded SCSI controller, the LSI53C1010. For more information on the operation of the Subsystem Vendor ID and Subsystem ID registers, refer to the
Subsystem | ID Number |
|
|
Subsystem Vendor ID | 1000 |
|
|
Subsystem ID | 1050 |
|
|
Technical Specifications |