
2.1.2 Inserting the Host Adapter
Perform the following steps to install your Ultra320 SCSI Host Adapter in the PC mainboard.
Step 1. Remove the blank bracket panel on the back of the computer that is aligned with the
Save the bracket screw.
Step 2. Carefully insert the edge connector J1 of the host adapter into the
Figure 2.2 Inserting the Host Adapter
Bracket Screw
Step 3. Make sure the edge connector is properly aligned before pressing the board into place. The bracket around connector J2 and J3 should fit into the empty space where the blank bracket panel was removed.
Installing your Ultra320 SCSI Host Adapter |
Copyright © 2002 by LSI Logic Corporation. All rights reserved.