Step 3. Connect any additional SCSI devices to one another with shielded external SCSI cables. You will need a separate SCSI cable for each additional device.

Figure 2.10 shows how to connect multiple external SCSI devices.

Figure 2.10 Connecting Multiple External SCSI Devices

Enable termination on the device at the end of the bus.

Disable termination on all devices not at the end of the bus.

Host Adapter

Automatically

Terminated

 

Step 4. Be sure that termination is enabled on the last external SCSI

 

device as shown in Figure 2.10. See Section 2.4, “Terminating

 

the SCSI Bus,” page 2-11for more information about SCSI bus

 

termination.

2-10

Detailed Host Adapter Installation

Copyright © 2002 by LSI Logic Corporation. All rights reserved.