2.6 Completing the Installation

Before replacing the cover on your computer, complete the checklist as shown in Table 2.2.

Table 2.2 Host Adapter Installation Check List

Verify Installation Procedures

Done

Host adapter connection in PCI-X bus slot is secure (level)

Internal SCSI bus connections are secure (pin-1 continuity)

External SCSI bus connections are secure

Proper SCSI bus termination established

Unique SCSI IDs set and recorded for each device

After you verify all items on the checklist, follow these steps:

Step 1. Replace the cabinet cover on your computer.

Step 2. Plug in all power cords, and turn on power to all devices and your computer.

Step 3. Wait for your computer to boot up.

Note: To change default configurations of the Ultra320 SCSI host adapters, refer to the Fusion-MPT™ Device Management System User’s Guide.

Completing the Installation

2-13

Copyright © 2002 by LSI Logic Corporation. All rights reserved.