LSI DF1153-E1 Descriptions, Order Information, Cable, Data Size, Transfer, Range, Part, Length

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FC-1 10x, E2400 10x, FC-1 14x, and E2400 14x Interface Cables

The drive modules and command modules support Fibre Channel connections to the command modules. They have four gigabit interface converter (GBIC) connectors, two on each ESM or controller. The connectors may be fiber optic or copper. The type of connector depends on what type of drive interface you ordered and what type of cable you are using to attach the drive module or command module to the command module.

If you ordered optical GBIC connectors, you will need fiber optic cable. If you ordered copper GBIC connectors, you will need copper wire cable. Table 15 lists the types and lengths of cable available from your local dealer.

Table 15 Fibre Channel Host and Drive Interface Cables

	Descriptions			Order Information
Cable	Data Size	Transfer	Range	Part	Length
		Speed		Number
				006-1086672	2 meter
Fiber optic, multi-mode,
			Up to 0.5	006-1086416	3 meter
50 micrometer, shortwave	100 MB/sec	1062.5 Mbaud
			kilometer	006-1086673	5 meter
laser
				006-1086417	10 meter
				006-1086682	2 meter
Copper wire, shielded,
			Up to 30	006-1086672	3 meter
twisted pair, electrical	100 MB/sec	1062.5 Mbaud
			meters	006-1086483	5 meter
signal
				006-1086473	10 meter

28 Drive Module Site Preparation Guide