LSI U40HVD Figure 2.8 SCSI LED Connectors

Step 4. Most PC cabinets are designed with a front panel LED which may already be connected to an existing IDE drive. You may connect this LED cable to your SCSI host adapter, as shown in Figure 2.8. This connection causes the front panel LED to indicate activity on the SCSI bus.

The LED connectors J4 and J7 (see Figure 2.1) are not keyed. The orientation of the LED cable does not matter as long as all four pins are connected.

Figure 2.8 SCSI LED Connectors

Some LED cables have only two wires. In this case, place the connector on one end or the other of J4 or J7. If the LED does not light during SCSI bus activity from this host adapter, you may have to rotate the LED cable 180° on J4 or J7.

See Table A.5 in Appendix A for connector pinout information.

Detailed Installation Procedure

2-13

Contents

USER’S GUIDE Electromagnetic Compatibility Notices Page Page Preface Page Contents Appendix A Appendix B Glossary Terms and Abbreviations Index Customer Feedback Figures Page Tables Page Using the LSIU40HVD 1.1General Description 1.2Features 1.2.1PCI Interface 1.2.2SCSI Interface 1.2.3Board Characteristics 1.3Interface Descriptions 1.3.1The PCI Interface 1.3.2The SCSI Interface 1.3.3Ultra SCSI Installing the LSIU40HVD 2.1Quick Installation Procedure Page 2.2Detailed Installation Procedure 2.2.1Before You Start 2.2.2Inserting the Host Adapter Figure 2.1 Hardware Connections for the LSIU40HVD 2.2.3Connecting the SCSI Peripherals Table SCSI Bus Widths and Speeds Figure 2.3 SCSI Cables 2.2.3.1Making Internal SCSI Bus Connections Page Figure 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device Connection Figure 2.6 Connecting Additional Internal SCSI Devices Page Figure 2.8 SCSI LED Connectors 2.2.3.2Making External SCSI Bus Connections Figure 2.9 External Cable to Host Adapter Figure 2.10 External Cable to External SSI Device 2.2.4SCSI Bus Termination 2.2.4.1Internal SCSI Connections Figure 2.12 Internal SCSI Device Termination 2.2.4.2External SCSI Connections Figure 2.13 External SCSI Device Termination 2.2.4.3Internal and External SCSI Connections Figure 2.14 Internal and External SCSI Device Termination 2.2.5Setting SCSI IDs 2.3Setting Interrupts 2.4Completing the Installation Page Conﬁguring the Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix A Technical Speciﬁcations A.1 Physical Environment A.1.1 Physical Characteristics A.1.2 Electrical Characteristics A.1.3 Thermal, Atmospheric Characteristics A.1.4 Electromagnetic Compliance A.1.5 Safety Characteristics A.2 Operational Environment A.2.1 The PCI Interface Table A.2 PCI Connector J1 (Front) Table A.3 PCI Connector J1 (Back) A.2.2 The SCSI Interface Table A.4 SCSI Connectors J2/J5 and J3/J6 A.2.3 The LED Interface Page Appendix B Glossary Terms and Abbreviations Conﬁguration CPU DMA Bus Master Device Driver File Firmware Hard Disk Host Host Adapter Motherboard Multitasking Multithreading NVRAM Operating System Port Address Port Number Queue Tags RAM RISC Core SCSI ID SDMS Single-Ended STA Synchronous Data Transfer Wide SCSI Wide Ultra SCSI Wide Ultra2 Word Page Index Page Customer Feedback Reader’s Comments http://www.lsilogic.com/contacts/na_salesofﬁces.html