Main Menu |
|
|
|
|
|
Change Status on Next Boot: |
|
|
| ||
| Port | ||||
| Num | Level | Current | Found | |
|
| ||||
LSI53C875 | FC00 | 9 | On | On | Yes |
LSI53C875 | F800 | 9 | On | Off | Yes |
LSI53C895 | F801 | 9 | On | Off | Yes |
|
|
|
|
|
|
To change an adapter's status, select it and pressEnter. Press the
Escape (Esc) key to exit from this menu.
3.2.1.2Adapter Boot OrderThe adapter boot order allows the user to set the order in which host adapters will boot when you have more than one LSI Logic host adapter in your system. When this option is selected, the Boot Order menu appears.
Figure 3.3 is an example of the Boot Order Menu.
Figure 3.3 Boot Order MenuMain Menu |
|
|
|
|
|
| |
BootSeq | Bus | DevFunc | BootSeq |
| Bus | DevFunc | |
0 | LSI53C875 | 00 | A0 | 1 | LSI53C875 | 00 | 98 |
2 | LSI53C895 | 00 | 90 |
|
|
|
|
|
|
|
|
|
|
|
|
To change an adapter's boot order, select it and pressEnter. You are then prompted to enter the new boot sequence number. To remove an adapter's boot order, pressEnter again rather than entering a new sequence number. While the maximum capacity is 32 adapters, only four adapters can be assigned a boot order starting with boot sequence number zero (0). If an invalid number is entered, an error message appears. When the adapters are ordered as desired, press the Escape (Esc) key to exit from this menu.
Starting the SCSI BIOS Configuration Utility |